DIRECTIONS FOR USE
1. Ensure proper ventilation before handling this product. Wear PPE such as masks, gloves, safety goggles, and protective clothing.
2. Apply Marshall SD by dripping, brushing, wiping, or spraying it on the soiled surfaces. Avoid using fine mist type spray.
3. Leave it to dry.
NOTE: Observe caution in equipment with plastic parts as this product dissolves certain plastic materials insulation on prolonged contact. Apply a small amount of MARSHALL SD on a test area of the plastic surface to determine chemical compatibility.

PACKAGING
MARSHALL SD is available in 1-liter bottles, 4-liter gallons, and 20-liter pails.

STORAGE & CONDITION
Store in a cool, dry, and well-ventilated place where temperatures do not exceed 30oC. Keep container tightly capped and in an upright position when not in use. Store away from heat, open flames, and other ignition sources. Keep away from direct sunlight.

PRECAUTIONS
DANGER! HARMFUL IF SWALLOWED OR INHALED.
KEEP OUT OF REACH OF CHILDREN. Avoid breathing mist or vapor. Avoid contact with eyes and skin. If eye contact occurs, rinse thoroughly with running water for a minimum of 20 minutes. If eye irritation persists, seek medical attention. If on skin, take off all contaminated clothing. Rinse skin immediately with plenty of water for at least 15 minutes. If inhaled, remove person to fresh air and keep comfortable for breathing. If swallowed and the patient is conscious, administer milk or water and call a physician immediately. Do not induce vomiting.