DIRECTIONS FOR USE
1. Thoroughly clean the metal surface to remove any loose dirt and debris.
2. Liberally spray or brush LUBRICOAT 2 across the entire surface to be treated.
3. Leave the coat on the surface.
4. Do not wipe or remove the protective layer.

PACKAGING
LUBRICOAT 2 is available in 1-liter bottles, 4-liter gallons, and 20-liter pails.

STORAGE & CONDITION
Store in a cool, dry, and well-ventilated place where temperatures do not exceed 30oC. Keep container tightly capped and in an upright position when not in use. Store away from heat, open flames, and other ignition sources. Keep away from direct sunlight.

PRECAUTIONS
KEEP OUT OF REACH OF CHILDREN. Avoid contact with eyes and skin. If eye contact occurs, rinse thoroughly with running water for a minimum of 20 minutes. If eye irritation persists, seek medical attention. If on skin, take off all contaminated clothing. Rinse skin immediately with soap and plenty of water for at least 15 minutes. If inhaled, remove person to fresh air and keep comfortable for breathing. If swallowed and the patient is conscious, administer milk or water and call a physician immediately. Do not induce vomiting.