MARSHALL FD

Safety Solvent Degreaser – Fast Dry

MARSHALL FD is a non-conductive, fast-drying solvent that effectively removes all deposits of grease, oil, gum, sludge, and other stubborn soils from electrical wires, contacts, or rubber parts without damaging the sensitive components. It is designed for degreasing motors, generators, and electrical equipment.

FEATURES & BENEFITS

• Penetrates the deepest crevices of electrical motors and other equipment

• Useable on all parts of electrical equipment

DIRECTIONS FOR USE

1. Ensure proper ventilation before handling this product. Wear PPE such as masks, gloves, safety goggles, and protective clothing.

2. Apply Marshall FD by dripping, brushing, wiping, or spraying it on the soiled surfaces. Avoid using fine mist type spray.

3. Leave it to dry.

PACKAGING

MARSHALL FD is available in 1-liter bottles, 4-liter gallons, and 20-liter pails.

STORAGE & CONDITION

Store in a cool, dry, and well-ventilated place where temperatures do not exceed 30oC. Keep container tightly capped and in an upright position when not in use. Store away from heat, open flames, and other ignition sources. Keep away from direct sunlight.

PRECAUTIONS

DANGER! CAUSES SEVERE EYE IRRITATION.

KEEP OUT OF REACH OF CHILDREN. Avoid breathing mist or vapor. Avoid contact with eyes and skin. If eye contact occurs, rinse thoroughly with running water for a minimum of 20 minutes. If eye irritation persists, seek medical attention. If on skin, take off all contaminated clothing. Rinse skin immediately with plenty of water for at least 15 minutes. If inhaled, remove person to fresh air and keep comfortable for breathing. If swallowed and the patient is conscious, administer milk or water and call a physician immediately. Do not induce vomiting.

Related Products

TECHNICAL DATA SHEET

REQUEST FORM