DIRECTIONS FOR USE
For surface cleaning:
1. Dilute RUSTICO 1 using the following dilution ratios as necessary:
• For light rust: Dilute with water using a 1:3 ratio
• For heavy rust: Use as pure
2. Brush the solution on the surface and leave to react for a few minutes.
3. Thoroughly rinse with water.
4. Repeat the process as necessary
For Dip Tank Method:
1. Fill an open lid, plastic-lined container with RUSTICO 1.
2. Dip the corroded metal parts into the container and leave it to react for a few minutes.
3. Thoroughly rinse with water.
4. Repeat the process as necessary
NOTE: Wear PPE such as masks, gloves, safety goggles, and protective clothing.

PACKAGING
RUSTICO 1 is available in 4-liter gallons and 20-liter pails.

STORAGE & CONDITION
Store in a cool, dry, and well-ventilated place where temperatures do not exceed 30oC. Keep container tightly capped and in an upright position when not in use. Store away from heat, open flames, and other ignition sources. Keep away from direct sunlight.

PRECAUTIONS
DANGER! CORROSIVE! MAY BE FATAL IF SWALLOWED.
KEEP OUT OF REACH OF CHILDREN. Avoid breathing mist or vapor. Avoid contact with eyes and skin. If eye contact occurs, rinse thoroughly with running water for a minimum of 20 minutes. If eye irritation persists, seek medical attention. If on skin, take off all contaminated clothing. Rinse skin immediately with plenty of water for at least 15 minutes. If inhaled, remove person to fresh air and keep comfortable for breathing. If swallowed and the patient is conscious, administer milk or water and call a physician immediately. Do not induce vomiting.