Electrical Cleaner Archives - Prevox Industrial Chemicals https://prevoxchemicals.com.ph/product-category/electrical-cleaner/ Tue, 26 Oct 2021 02:39:18 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.2 https://prevoxchemicals.com.ph/wp-content/uploads/2021/11/pvfabicon-1.png Electrical Cleaner Archives - Prevox Industrial Chemicals https://prevoxchemicals.com.ph/product-category/electrical-cleaner/ 32 32 MARSHALL SD https://prevoxchemicals.com.ph/product/marshall-sd/ Mon, 13 Sep 2021 07:18:19 +0000 https://prevoxchemicals.com.ph/?post_type=product&p=448 Safety Solvent Degreaser – Slow Dry

MARSHALL SD is a non-conductive solvent designed specifically to degrease electrical motors, generators, and electrical equipment. It effectively removes all deposits of grease, oils, gum, sludge, and other stubborn soil without damaging sensitive electrical wires, contacts, or rubber parts.

FEATURES & BENEFITS
• Penetrate the deepest crevices of electrical motors and other equipment
• Useable on all parts of electrical equipment.

The post MARSHALL SD appeared first on Prevox Industrial Chemicals.

]]> DIRECTIONS FOR USE
1. Ensure proper ventilation before handling this product. Wear PPE such as masks, gloves, safety goggles, and protective clothing.
2. Apply Marshall SD by dripping, brushing, wiping, or spraying it on the soiled surfaces. Avoid using fine mist type spray.
3. Leave it to dry.
NOTE: Observe caution in equipment with plastic parts as this product dissolves certain plastic materials insulation on prolonged contact. Apply a small amount of MARSHALL SD on a test area of the plastic surface to determine chemical compatibility.

PACKAGING
MARSHALL SD is available in 1-liter bottles, 4-liter gallons, and 20-liter pails.

STORAGE & CONDITION
Store in a cool, dry, and well-ventilated place where temperatures do not exceed 30oC. Keep container tightly capped and in an upright position when not in use. Store away from heat, open flames, and other ignition sources. Keep away from direct sunlight.

PRECAUTIONS
DANGER! HARMFUL IF SWALLOWED OR INHALED.
KEEP OUT OF REACH OF CHILDREN. Avoid breathing mist or vapor. Avoid contact with eyes and skin. If eye contact occurs, rinse thoroughly with running water for a minimum of 20 minutes. If eye irritation persists, seek medical attention. If on skin, take off all contaminated clothing. Rinse skin immediately with plenty of water for at least 15 minutes. If inhaled, remove person to fresh air and keep comfortable for breathing. If swallowed and the patient is conscious, administer milk or water and call a physician immediately. Do not induce vomiting.

The post MARSHALL SD appeared first on Prevox Industrial Chemicals.

]]> MARSHALL FD https://prevoxchemicals.com.ph/product/marshall-fd/ Mon, 13 Sep 2021 07:16:37 +0000 https://prevoxchemicals.com.ph/?post_type=product&p=441 Safety Solvent Degreaser – Fast Dry

MARSHALL FD is a non-conductive, fast-drying solvent that effectively removes all deposits of grease, oil, gum, sludge, and other stubborn soils from electrical wires, contacts, or rubber parts without damaging the sensitive components. It is designed for degreasing motors, generators, and electrical equipment.

FEATURES & BENEFITS
• Penetrates the deepest crevices of electrical motors and other equipment
• Useable on all parts of electrical equipment

The post MARSHALL FD appeared first on Prevox Industrial Chemicals.

]]> DIRECTIONS FOR USE
1. Ensure proper ventilation before handling this product. Wear PPE such as masks, gloves, safety goggles, and protective clothing.
2. Apply Marshall FD by dripping, brushing, wiping, or spraying it on the soiled surfaces. Avoid using fine mist type spray.
3. Leave it to dry.

PACKAGING
MARSHALL FD is available in 1-liter bottles, 4-liter gallons, and 20-liter pails.

STORAGE & CONDITION
Store in a cool, dry, and well-ventilated place where temperatures do not exceed 30oC. Keep container tightly capped and in an upright position when not in use. Store away from heat, open flames, and other ignition sources. Keep away from direct sunlight.

PRECAUTIONS
DANGER! CAUSES SEVERE EYE IRRITATION.
KEEP OUT OF REACH OF CHILDREN. Avoid breathing mist or vapor. Avoid contact with eyes and skin. If eye contact occurs, rinse thoroughly with running water for a minimum of 20 minutes. If eye irritation persists, seek medical attention. If on skin, take off all contaminated clothing. Rinse skin immediately with plenty of water for at least 15 minutes. If inhaled, remove person to fresh air and keep comfortable for breathing. If swallowed and the patient is conscious, administer milk or water and call a physician immediately. Do not induce vomiting.

The post MARSHALL FD appeared first on Prevox Industrial Chemicals.

]]>