DIRECTIONS FOR USE
1. Ensure proper ventilation before handling this product. Wear PPE such as masks, gloves, safety goggles, and protective clothing.
2. Dilute HARDMOVE using the following dilution ratios as needed:
• Light cement layers: Dilute with water up to a 1:2 ratio
• Heavy cement layers: Use as pure
3. Brush the solution on the surfaces and leave it to react until the cement softens.
4. Scrape and remove residues from the surface.
5. Repeat application if necessary.
NOTE: When diluting, never add water to the product. The product should always be added to water slowly and in small amounts to avoid a violent chemical reaction.

PACKAGING
HARDMOVE is available in 1-liter bottles, 4-liter gallons, and 20-liter pails.

STORAGE & CONDITION
Store in a cool, dry, and well-ventilated place where temperatures do not exceed 30oC. Keep container tightly capped and in an upright position when not in use. Store away from heat, open flames, and other ignition sources. Keep away from direct sunlight. Avoid exposure to moist air or water.

PRECAUTIONS
DANGER! CORROSIVE! MAY BE FATAL IF SWALLOWED. LIQUID AND MIST CAUSE SEVERE BURNS TO ALL BODY TISSUE.
KEEP OUT OF REACH OF CHILDREN. Avoid breathing mist or vapor. Avoid contact with eyes and skin. If eye contact occurs, rinse thoroughly with running water for a minimum of 20 minutes. If eye irritation persists, seek medical attention. If on skin, take off all contaminated clothing. Rinse skin immediately with plenty of water for at least 15 minutes. If inhaled, remove person to fresh air and keep comfortable for breathing. If swallowed and the patient is conscious, administer milk or water and call a physician immediately. Do not induce vomiting.